|Place of Origin:||Henan, China (Mainland)|
|Minimum Order Quantity:||1|
|Delivery Time:||20 days and depends on ordering quantity|
|Payment Terms:||L/C, D/A, D/P, T/T, MoneyGram, Western Union|
|Power(W):||4-75 Kw||Certification:||ISO, BV, CE|
|Discharge Size(mm):||0.074-0.6||Qty Of Support:||3-6|
|Grinding Type:||Dry &wet Type||Warranty:||12 Month|
|Model Number:||Multi-model||Rev Speed(rpm):||0.58-2.85|
|Color:||Customer's Requirments||Place Of Origin:||Henan, China (Mainland)|
|Type:||Cement Rotary Kiln|
lime kiln plant,
rotary calcining kiln
Precalcining Cement Rotary Kiln Magnesite Sintered Rotary Kiln Dryer
Rotary kiln is composed of cylinder, gears, support device, kiln liner and kiln tail sealing equipment, kiln head hood and combustion. Cylinder as heated pivoting part, made of high quality carbon steel plate.
Rotary Kiln is the key equipment of cement clinker dry process and wet process production line, and is also used in various industries such as metallurgical , chemical industry ,building refractory ,environmental protection industry , etc .
The rotary kiln is a cylindrical vessel, inclined slightly to the horizontal, which is rotated slowly about its axis. The material to be processed is fed into the upper end of the cylinder. As the kiln rotates, material gradually moves down towards the lower end, and may undergo a certain amount of stirring and mixing. Hot gases pass along the kiln, sometimes in the same direction as the process material, but usually in the opposite direction. The hot gases may be generated in an external furnace, or may be generated by a flame inside the kiln. Such a flame is projected from a burner pipe (or "firing pipe") which acts like a large burner. The fuel for this may be gas, oil or pulverized coal.
1. The upper feeding system: includes the upper hopper, the next material possession, the next feeding method and structure can guarantee to the before heater of the body feeding to achieve security when closed. So that the cold air from outside can not enter into the preheat and feeding can make use of valve rod to achieve continuous or intermittent feeding.
2. Preheat body: it is to ensure that material preheated to 900 degrees Celsius of the most important part. It is by the warm room, hanging devices and brick lining (which does not belong to the scope of design and manufacturing equipment) and other parts. That part of the structure of most of metal structures, part of the material according to the need to use a heat resistant steel, heat resistant steel to 1100 degrees Celsius in 1000 to work under high temperatures. In addition, the refractory bricks lining structure, novel design, sealing is good, can guarantee the material in before heater evenly and achieve before heating temperature preheating.
3. Pusher devices: mainly rod, framework, and connecting rods and other parts of rod using heat resistant steel casting or welded together, can withstand high temperatures, using electronic control and hydraulic systems can be by putting the various hydraulic automatic control program to achieve sequential pusher.
4.The hydraulic system: includes tanks, pumps, motors, solenoid valves, hydraulic tubing, etc., his main role is to control the pusher device to push the completion of material movement.
5.Bottom feeding room: The main include slide tube, feeding the main room, feeding slip mouth and so on, its main role is to import the materials after preheating rotary kiln calcination.
6. Framework: It includes columns and ring beam and so on, the main role is to carry The upper part of the structure.
YZ1632 rotary kiln parameter for lime production line
|Type||Rotary kiln||Rotary kiln||Rotary kiln||Rotary kiln|
Contact Person: Mr. liu
Tel: 86 371 60256696