|Place of Origin:||Henan, China (Mainland)|
|Minimum Order Quantity:||1|
|Delivery Time:||20 days and depends on ordering quantity|
|Payment Terms:||L/C, D/A, D/P, T/T, MoneyGram, Western Union|
|Brand Name:||HongJi||Power(W):||4-75 Kw|
|Discharge Size(mm):||0.074-0.6||Model Number:||Multi-model|
|Rev Speed(rpm):||0.58-2.85||Color:||Customer's Requirments|
|Place Of Origin:||Henan, China (Mainland)||Weight:||5.1-97t|
|Operation Training:||Provided||Type:||Cement Rotary Kiln|
rotary kiln cement plant,
rotary calcination kiln
Active Lime/ Rotary Kiln /Cement Production Line with ISO Approval
Cement rotary kiln structure:
The basic components of a rotary kiln are the shell, the refractory lining, support tyre and rollers,drive gear and internal heat exchangers.
The kiln connects with a material exit hood at the lower end and to ducts for waste gases. This requires gas tight seals at either end of the kiln. The exhaust gas may go to waste, or may enter a preheater which further exchanges heat with the entering feed. The gases must be drawn through the kiln, and the preheater if fitted, by a fan situated at the exhaust end. In preheater installations which may have a high pressure drop, a lot of fan power may be needed, and the fan is often then largest drive in the kiln system. Exhaust gases contain dust and there may be undesirable constituents such as sulfur dioxide or hydrogen chloride. Equipment is installed to scrub these out before the exhaust gases pass to atmosphere.
The kiln is a cylindrical vessel, inclined slightly to the horizontal, which is rotated slowly about its axis. The material to be processed is fed into the upper end of the cylinder. As the kiln rotates, material gradually moves down towards the lower end, and may undergo a certain amount of stirring and mixing. Hot gases pass along the kiln, sometimes in the same direction as the process material, but usually in the opposite direction (counter current). The hot gases may be generated in an external furnace, or may be generated by a flame inside the kiln. Such a flame is projected from a burner pipe (or "firing pipe") which acts like a large burner. The fuel for this may be gas, oil or pulverized coal.
As the main equipment in both of the cement clinker dry and wet process production lines, this cement rotary kiln is widely used in metallurgy field, chemical industry, building refractory material sector, environmental protection field, and so on. It mainly consists of cylinder body, supporting device, supporting device with catch wheel, driving device, movable kiln head, sealing equipment of the kiln end, coal spraying pipe, etc.
YZ3226 rotary kiln for cement production line
|Type||Rotary kiln||Rotary kiln|
Contact Person: Mr. liu
Tel: 86 371 60256696