|Place of Origin:||Henan, China (Mainland)|
|Minimum Order Quantity:||1|
|Delivery Time:||20 days and depends on ordering quantity|
|Payment Terms:||L/C, D/A, D/P, T/T, MoneyGram, Western Union|
|Dimension(L*W*H):||1.6 X1.7||Warranty:||12 Months|
|Dust Filter:||Cyclone, Bag Filter||Screen:||Linear Vibrating Screen|
|Type:||Rotary Drum Dryer||Voltage:||380v, 415v, 440v, 460v|
|Weight:||5 T||Capacity(DLS 625):||3-5 T/h|
|Feeder:||Vibrating Feeder||Control:||Electric Control Cabinet|
1.6 x1.7 Rotary Drum Dryer,
5t/h Rotary Drum Dryer,
1.6 x1.7 coal rotary dryer
New Type Rotary Drying Equipment Drum Dryer For Sand
Rotary dryer, also known as rotary drum dryer,rotary drier.
Rotary dryer is mainly used for drying materials with some moisture and granularity in ore beneficiation, building material, metallurgy and chemical department. Drum dryer has high adaptability to the materials so that it can be used for drying all kinds of materials, and in addition, the operation of this equipment is simple and reliable, for this reason, it gets wide application.
Rotary drying equipment Main features:
1.Strong resistance to overload, large capacity, less fuel consumption, and low drying cost.
2.Adopts downstream drying method, flue gas and wet material into the drying machine from the same side;adopt high temperature flue gas to obtain high evaporation strength, the outlet temperature of the dryer is low and high thermal efficiency is good.
3.It can change operation parameters according to the different material properties, make the material in the dryer cylinder body form stable whole broken fabric curtain and improve the heat exchange more sufficiently;
4.With new-type feeding and discharging device, it can prevent from drum dryer feeding jams, discontinuous and uneven return phenomenon, reduces the loading of dust removal system.
5.Special internal structure design, which not only can strengthen the effect on scattered material cleaning and heat conduction but also eliminate the materials sticky phenomenon, making material moisture and stickness more flexible;
6. Drying machine achieved the "zero thrust", greatly reducing abrasion between the tug wheel and catch wheel, make cylinder run smoothly and steadily ;
7.Drying machine adopts "self-aligning roller device", make the wheel and roll ring with a forever linear contact, thus greatly reduces the abrasion and power loss;
8.The product size and moisture could be controlled according to user requirement. The moisture could be lower than 8% while drying the coal slime, the size could be controlled smaller than 8mm.
Rotary Dryer Structure
rotary drying equipment Workiing Principle:
The heat source of the drum dryer comes from the combustion device and this dryer uses co-current heating method, so that when the materials to be dried go into the cylinder from the feeding box or feeding chute, they are pushed back by the spiral lifting board. Since the drum dryer is obliquely installed, the materials flow to the lower end of the machine under the gravity and the rotation of the machine, and on the other hand, the materials are repeatedly lifted by the lifting board to the higher end and then spread down constantly, so that the materials will form a even curtain inside the cylinder and conduct heat exchange with the hot air inside the cylinder. Since the materials constantly spread and the water contained in them will be dried, thus achieving the aim of drying.
The rotary dryer will start delivery in 30 days after payment. It will be packed in the export standard container, its main motor and spare parts will be put in the water-proof and sealed wooden case.
We promise that the rotary dryer will be shipped to you timely and safely.
Contact Person: Mr. liu
Tel: 86 371 60256696